Nokia 7360 Intelligent Services Access Manager FX Series Hardware Installation Manual page 402

Ansi
Hide thumbs Also See for 7360 Intelligent Services Access Manager FX Series:
Table of Contents

Advertisement

Installing a 7360 ISAM WM shelf
6
7
8
402
Ensure that the drip tray has been installed in the correct position beneath the
7360 ISAM WM shelf.
Note 1 — A drip tray must be installed in the rack before the
7360 ISAM WM shelf is installed. See Procedure
below a 7360 ISAM WM
Note 2 — Once the drip tray is installed, the 7360 ISAM WM shelf must
be lifted over the drip tray and then lowered into the correct mounting
position, to avoid interference between the 7360 ISAM WM shelf and drip
tray side walls.
Mount the 7360 ISAM WM shelf in the third lowest mounting position in the rack by lifting the
shelf over the already installed drip tray, and then lowering it slowly into the correct mounting
position.
Attach the shelf to the rack using eight 12 x 24 1/2 in. (12 mm) hex screws; see Figure 233.
Warning — Risk of physical harm or damage when lifting shelf.
The shelf has to be lifted by two persons. Pay attention to possible sharp
edges when handling. It is advisable to wear protective gloves.
3HH-12893-AAAA-TCZZA
ANSI Hardware Installation Manual
shelf".
DRAFT
90 "To install a drip tray
Issue: 09

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7360 isam fx-16

Table of Contents