ANSI Hardware Installation Manual
Figure 138
Procedure 56
Use the following procedure to connect the power cables to the 7360 ISAM FX-8 shelf.
1
2
Issue: 09
Power cable routing for 7360 ISAM FX-8
To connect power cables
Danger — Before connecting the power cables, make sure that the
power to the cables has been disconnected and the circuit breakers for
BAT A and BAT B are switched off.
Note 1 — Power cables connect the PDF directly to the shelf.
Note 2 — All hardware shown in Figure
7360 ISAM FX-8 shelf.
Note 3 — Avoid sharp bends in cables. Use the proper bend radius
when installing cables.
Ensure the power to the cables has been disconnected.
Loosen the screws on the safety cover and remove the safety cover; see Figure 139.
3HH-12893-AAAA-TCZZA
139
DRAFT
7360 ISAM FX-8 shelf cabling
22384
is provided with the
267