Op Hotkeys, Plc Keys - Siemens SINUMERIK 840D sl Commissioning Manual

10 Customized User Interface
10.6

OP hotkeys, PLC keys

10.6 OP hotkeys, PLC keys
OP hotkeys
PLC keys
Configuration
10-166
You can configure the keys "Position", "Program", "Offset", "Program Manager",
"Alarm", and "Custom" on the operator panel to branch to an operating area of
your choice.
You can configure so–called "PLC keys" to branch to particular operating areas.
You can switch to the following operating areas with the OP hotkeys or PLC keys:
S
ShopTurn on NCU (HMI Embedded)
From ShopTurn to any operating area of ShopTurn.
S
PCU 50.3
From ShopTurn to any other operating area in ShopTurn.
From ShopTurn to any other operating area in HMI Advanced and vice
versa.
Information about the configuration can be found in:
References: /IAM/, Commissioning Manual CNC Part 2 (HMI),
SINUMERIK 840D sl/840D/840Di/810D,
BE1 Operator Interface Extension (BE1),
keyword "OP Hotkeys" and "PLC Keys"
Note
The configuration of the "PLC Keys" in ShopTurn is carried out in the file
KEYS.INI, not via the DB 19 interface.
The file KEYS.INI must feature the following entry in the section
[HMI_INI_FILES]:
Task6 = shopturn.ini
SINUMERIK 840D sl Commissioning Manual CNC: ShopTurn – 11/2006 Edition
© Siemens AG 2006 All Rights Reserved
11/2006
J