User Status Display - Siemens SINUMERIK 840D sl Commissioning Manual

11/2006
10.5

User status display

User
symbols
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D sl Commissioning Manual CNC: ShopTurn – 11/2006 Edition
You can display machine states controlled via the PLC as custom user icons in
the program status line.
Fig. 10-1 Program status bar
You need to activate the display of user icons in the display MD 9052
SHOW_CHANNEL_SPANNING_STATE.
The program path of the currently selected program is shown in the line below
together with the program name.
16 display positions are defined in the program status bar.
The custom user icons must meet the following requirements:
S
Colors: 16–color mode
S
Size: OP010/OP010C/OP010S: 16 x 16 pixels
OP012: 20 x 20 pixels
OP015: 27 x 26 pixel (height x width)
S
File name: 8 characters
S
Format: BMP
For ShopTurn on PCU 50.3 (HMI Advanced), you store user symbols in the di-
rectory F:\DH\CUS.DIR\HLP.DIR.
For ShopTurn on NCU (HMI Embedded), you place the icons in the following
folders:
Table 10-5 Directory for saving user–specific icons
Storage folder
ico640 OP 010 / 640 x 480
ico800 OP 012 / 800 x 600
ico1024 OP 015 / 1024 x 768
10 Customized User Interface
10.5 User status display
Program status bar
OP/resolution
16 x 16 pixels
20 x 20 pixels
27 x 26 pixels
Size of icons
(height x width)
10-163