Display Machine Data; Acceptance Report - Siemens SINUMERIK 840D sl Commissioning Manual

11/2006
4.2.6

Display machine data

4.2.7

Acceptance report

© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D sl Commissioning Manual CNC: ShopTurn – 11/2006 Edition
NCK Reset
If no tool management is available:
Create and load the configuration file for
the tool management (see ch. 8.3.3
"Creating and loading the configuration
file").
Transfer data from the directory
\ShopMill_Turn of the toolbox as an
example.
Fig. 4-5 NCK SINUMERIK 840D sl installation and startup
Once you have completed installation of ShopTurn on the PCU and start–up of
NCK and PLC you must adapt the display machine data.
The display machine data are listed in Section 7.2 "Display machine data for
ShopTurn".
The acceptance report can be used to test the installed ShopTurn functions
once the ShopTurn installation and start–up have been completed.
The acceptance report is included on the ShopTurn CD–ROM.
4 Commissioning
4.2 Initial start–up
2
J
4-25