User Status Display - Siemens SINUMERIK 840DE sl Commissioning Manual

11/2006
10.4

User status display

User
symbols
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D sl Commissioning Manual CNC: ShopMill – 11/2006 Edition
You can display machine states controlled via the PLC as custom user icons in
the program status line.
Fig. 10-1 Program status line
You need to activate the display of user icons in the display MD 9052
SHOW_CHANNEL_SPANNING_STATE.
The program path of the currently selected program is shown in the line below
together with the program name.
16 display positions are defined in the program status bar.
The custom user icons must meet the following requirements:
S
Colors: 16–color mode
S
Size: OP010/OP010C/OP010S: 16 x 16 pixels
OP012: 20 x 20 pixels
OP015: 27 x 26 pixel (height x width)
S
File name: 8
S
Format: BMP
For ShopMill on PCU 50.3 (HMI Advanced), you store user symbols in the direc-
tory F:\DH\CUS.DIR\HLP.DIR.
For ShopMill on NCU (HMI Embedded), you place the icons in the following
folders:
Table 10-5 Directory for saving user–specific icons
Storage folder
ico640 OP 010 (640 x 480)
ico800 OP 012 (800 x 600)
ico1024 OP 015 (1024 x 768)
10 Customer–Specific Operator Interface
10.4 User status display
Program status line
OP/resolution
16 x 16 pixels
20 x 20 pixels
27 x 26 pixels
Size of icons
(height x width)
10-155