Siemens SINUMERIK 840DE sl Commissioning Manual page 66

7 Machine Data
7.2 Display machine data for ShopMill
9777
MD number
Default setting: 0x7F
Change becomes effective after: IMMEDIATELY
Data type: BYTE
Significance:
7-66
$MM_CMM_ENABLE_TIME_DISPLA Y
Enable the time display
Min. input limit: –
Protection level: 3/4
This MD is used to define the display of the runtimes.
Bit 0: Program progress display
Bit 1: Display time
Bit 2: Display date
Bit 3: Display machine runtime
Bit 4: Display processing time
Bit 5: Display utilization
Bit 6: Display program repeats
Note
For a description of the display machine data for measuring cycles, please
refer to Section 9.1.2 "Display machine data measuring cycles".
SINUMERIK 840D sl Commissioning Manual CNC: ShopMill – 11/2006 Edition
Max. input limit: –
Units: –
Valid as of software version
ShopMill 6.4
© Siemens AG 2006 All Rights Reserved
11/2006