Siemens SINUMERIK 840DE sl Commissioning Manual page 36

6 Signal Description
6.3 Overview of the former ShopMill interface
Table 6-2 Signals from ShopMill (output signals)
Address
DB82
DBX
36.3 CMM_OUT.spindle_stop_req
Spindle stop requested,
M5 output to spindle
36.4 CMM_OUT.spindle_right
Spindle rotation right preselected
36.5 CMM_OUT.spindle_left
Spindle rotation left preselected
36.7 CMM_OUT.ext_prog_sel
External processing program is selected
37.0 CMM_OUT.program_selection_done
Acknowledgment from HMI that a program
has been selected
37.1 CMM_OUT.program_test_activ
Function for program test is active
37.2 CMM_OUT.dry_run_activ
Function for DryRun is active
37.3 CMM_OUT.m01_activ
Function M01 is active
37.4 CMM_OUT.skip_block_activ
Function for skipping record is active
37.7 CMM_OUT.start_up_activ
ShopMill boot active
38.1 CMM_OUT.tool_un_load_internal
Load / unload tool without moving magazine
38.2 CMM_OUT.drf_activ
Function DRF is active
38.3 CMM_OUT.nc_start_ineffective
NC start has no effect
42.0 CMM_OUT.tool_m_function_1_on
Tool–specific function 1 active
42.1 CMM_OUT.tool_m_function_2_on
Tool–specific function 2 active
42.2 CMM_OUT.tool_m_function_3_on
Tool–specific function 3 active
42.3 CMM_OUT.tool_m_function_4_on
Tool–specific function 4 active
42.4 CMM_OUT.tool_m_function_1_activ
Tool–specific function 1 valid
42.5 CMM_OUT.tool_m_function_2_activ
Tool–specific function 2 valid
42.6 CMM_OUT.tool_m_function_3_activ
Tool–specific function 3 valid
6-36
Name
Comments
SINUMERIK 840D sl Commissioning Manual CNC: ShopMill – 11/2006 Edition
Spares
Standard interface DB3x.DB64.6 and
DB3x.DB64.7
Standard interface DB3x.DB64.6 and
DB3x.DB64.7
Standard interface DB3x.DB64.6 and
DB3x.DB64.7
n.a.
Omitted because of the new start lock logic of the
NCK. The program can be selected and started
directly.
Standard interface signal
DB21.DBX33.7
Standard interface signal
DB21.DBX318.6
Standard interface signal
DB21. DBX32.5
Standard interface signal
DB21. DBX26.0ff
n.a.
Standard interface signal
DB71.DBX32.0 for the 1st loading point
Standard interface signal
DB21.DBX24.3
Global start lock can be deactivated. Standard
interface signal DB21.DBX7.5
Omitted since ShopMill PLC no longer exists
(see also display MD 9739 to 9746)
Omitted since ShopMill PLC no longer exists
(see also display MD 9739 to 9746)
Omitted since ShopMill PLC no longer exists
(see also display MD 9739 to 9746)
Omitted since ShopMill PLC no longer exists
(see also display MD 9739 to 9746)
Omitted since ShopMill PLC no longer exists
(see also display MD 9739 to 9746)
Omitted since ShopMill PLC no longer exists
(see also display MD 9739 to 9746)
Omitted since ShopMill PLC no longer exists
(see also display MD 9739 to 9746)
© Siemens AG 2006 All Rights Reserved
11/2006