Siemens SINUMERIK 840DE sl Commissioning Manual page 48

7 Machine Data
7.2 Display machine data for ShopMill
9451
MD number
Default setting: 0.999
Change becomes effective after: IMMEDIATELY
Data type: DOUBLE
Significance:
9460
MD number
Default setting: H8
Change becomes effective after: IMMEDIATELY
Data type: LONG
Significance:
9478
MD number
Default setting: 1
Change becomes effective after: POWER ON
Data type: LONG
Significance:
7-48
$MM_WRITE_ZOA_FINE_LIMIT
Limit value for fine adjustment
Min. input limit: –
Protection level: 3/4
When entering the fine adjustment the difference between the previous value and the new
value must not exceed the value specified in this MD.
$MM_PROGRAM_SETTINGS
Settings in the Program area
Min. input limit: –
Protection level: 3/4
Bit 0 to 4: Reserved
Bit 5: Display hidden lines (;*HD*) in the G code editor
Bit 6: Reserved
Bit7: Deactivate G–program check (mold making)
$MM_TO_OPTION_MASK
Settings for ShopMill
Min. input limit: 0000
Protection level: 1
Bit 0: Display tool parameter "Number of teeth", "Spindle", "Cooling water" and "Tool–spe-
cific functions" in tool management.
Bit 1: Reserved
Bit 2: Display additional list in the tool management
Bit 3: Disable creation of new tools directly on a magazine location.
Bit 4 to bit 6: Reserved
Bit7: Disable editing of tool parameters if the tools are in the magazine (exception: wear
data).
Bit 8: Evaluate file TO_MILL.INI for configuration of the tool management user interface.
Bit 9: Disable loading/unloading of tools if a program is being executed on the machine.
Bit 10: Calculate tool wear data through addition.
Bit 11: Reserved
Bit 12: Disable loading and unloading at emergency off.
Bit 13: Display buffer magazine in turning tool management.
Bit 14: Reserved
Bit 15: Disable loading/unloading tool on spindle.
Bit 16: Reserved
Bit 17: Hide softkey "Relocate" in magazine list.
Bit 18: Hide softkey "Position" in magazine list.
Bit 19: Reserved
Bit 20: Always load tools directly on spindle.
Bit 21: Display basic length for angle head mill in detailed image.
Bit 22: Do not include measuring probe for the function "Unload all".
Bit 23: Reserved
Bit 24: Put magazine in wear list
SINUMERIK 840D sl Commissioning Manual CNC: ShopMill – 11/2006 Edition
Max. input limit: –
Units: mm
Valid as of software version
ShopMill 6.3
Max. input limit: –
Units: Hex
Valid as of software version
ShopMill 6.3
Max. input limit: FFFF
Units: Hex
Valid as of software version
ShopMill 6.3
© Siemens AG 2006 All Rights Reserved
11/2006