Siemens SINUMERIK 840DE sl Commissioning Manual page 120

8 Tool Management
8.10 Configuring the operator interface
Magazine location
type, OEM
parameter,
magazine
locations of the
buffer
ShopMill on NCU
(HMI Embedded)
PCU 50.3
8-120
A line break in the softkey text can be made by inserting two consecutive
blanks.
Note
Some texts for the parameters TPC1 and TPC2 are already prefilled with
sample texts which can be changed.
The texts for the magazine locations of the buffer and the cursor texts for the
parameter, magazine location type and OEM parameter must be located as
toggle field in the number range 89700 to 89899.
For ShopMill on NCU (HMI Embedded), enter the texts and numbers in the text
file ALUC.TXT. There is an ALUC.TXT text file in each language directory.
With the PCU 50.3 enter the texts and numbers in the text file
F:\DH\CUS.DIR\ALUC_xx.COM. If the ALUC_xx.COM file does not exist, you
need to create it in the CUS.DIR directory.
The texts are assigned to a language by means of the text file name. In the text
file name "xx" is replaced by one of the following codes:
Table 8-11 Language assignment
Abbreviation
XX
gy
uk
fr
it
sp
nl
dk
fi
bk
pl
tr
ch
tw
ko
hu
po
ru
SINUMERIK 840D sl Commissioning Manual CNC: ShopMill – 11/2006 Edition
Language
German
English
French
Italian
Spanish
Dutch
Danish
Finnish
Swedish
Polish
Turkish
Simplified Chinese
Chinese (Traditional)
Korean
Hungarian
Brazilian Portuguese
Russian
© Siemens AG 2006 All Rights Reserved
11/2006