Siemens SINUMERIK 840DE sl Commissioning Manual page 4

Foreword
Standard version
Finding
information
Instructions
Safety notes
!
iv
This document provides information about the control system design and the
interfaces of the individual components. In addition, the startup procedure of
ShopMill with SINUMERIK 840D sl is described.
For detailed information about individual functions, function assignment and
performance data of individual components, please refer to the appropriate doc-
ument for the subject concerned (e.g. manuals, description of functions etc.).
User–oriented activities such as the creation of parts programs and control
operating procedures are described in details in separate documents.
Further descriptions of tasks to be performed by the machine tool manufacturer
are also available for the standard SINUMERIK 840D sl. We may refer to them
in this documentation if appropriate.
In addition to the table of contents, we have provided the following information
in the appendix for your assistance:
1. List of abbreviations
2. Index
The alarms of SINUMERIK 840D sl can be found in
References: /DA/, Diagnostics Guide
For further useful information on startup and troubleshooting, please refer to
References: /FB/, D1, "Diagnostics Tools"
The following symbols with special significance are used in the documentation:
Note
This symbol always appears in the document where further information is
provided.
This manual contains information which you should observe in order to ensure
your own personal safety, as well to avoid material damage. Notes relating to
your safety are highlighted in the manual by means of a warning triangle; no
warning triangle appears in conjunction with notes relating to material damage.
Depending on the hazard level, warnings are indicated in a descending order as
follows:
Danger
This warning indicates that death or severe personal injury will result if the
appropriate precautions are not taken.
SINUMERIK 840D sl Commissioning Manual CNC: ShopMill – 11/2006 Edition
© Siemens AG 2006 All Rights Reserved
11/2006