Siemens SINUMERIK 840DE sl Commissioning Manual page 24

4 Commissioning
4.2 Initial start- -up
4-24
ShopMill on NCU
Via operating area "Services"
directory /CYCLE_STORAGE, load
the definitions and cycles from the
subdirectories:
Load the definitions DEFINES.ARC
from STANDARD_CYCLES.
Load the definitions
SM_DEF_E.ARC from
SEQUENCER_CYCLES.
Load the definitions DEFINES.ARC
from MEASURING_CYCLES.
Activate the files SMAC_SC.DEF,
SMAC_SM.DEF, GUDx.DEF (x = 5, 6,
7) and GUD7x(x=_JS, _MC, _SC,
_SM).DEF by pressing the softkey
"Activate"
Load the cycles CYCLES.ARC from
STANDARD_CYCLES.
Load the cycles SM_CYC_E.ARC from
SEQUENCER_CYCLES.
Load the cycles M_CYCLES.ARC
from MEASURING_CYCLES.
Load the cycles JOG_MEAS.ARC from
MEASURING_CYCLES/JOG_MEAS.
Fig. 4-4 NCK SINUMERIK 840D sl installation and startup
SINUMERIK 840D sl Commissioning Manual CNC: ShopMill - - 11/2006 Edition
1
PCU 50.3
Import SM_DEF.ARC
definitions from PCU 50.3
archive
Press "Load" softkey to
download the
SMAC_xx.DEF (xx = SC,
SM) and GUD7_xx.DEF
(xx = SC, JS, SM) files
Activate the files
SMAC.DEF and GUDx.DEF
(x = 5, 6, 7) by pressing the
softkey "Activate".
Import SM_CYC.ARC
cycles from PCU 50.3
archive
Load these cycles by
pressing the softkey "Load".
Note: The cycles are located
in the directories
STANDARD_CYCLES and
MANUFACTURER_CYCLES.
2
© Siemens AG 2006 All Rights Reserved
11/2006