Siemens SINUMERIK 840DE sl Commissioning Manual page 64

7 Machine Data
7.2 Display machine data for ShopMill
9740
MD number
Default setting: –1
Change becomes effective after: IMMEDIATELY
Data type: LONG
Significance:
9741
MD number
Default setting: –1
Change becomes effective after: IMMEDIATELY
Data type: LONG
Significance:
9742
MD number
Default setting: –1
Change becomes effective after: IMMEDIATELY
Data type: LONG
Significance:
9743
MD number
Default setting: –1
Change becomes effective after: IMMEDIATELY
Data type: LONG
Significance:
7-64
$MM_CMM__M_CODE_T OOL_FUNC_1_OFF
M code for tool–specific function 1 OFF
Min. input limit: – 1
Protection level: 3/4
This MD is used to define an M command for tool–specific function 1.
The value –1 means that the M function is not output.
If both M commands of function 1 =–1, the corresponding field is not displayed on the inter-
face.
$MM_CMM__M_CODE_T OOL_FUNC_2_ON
M code for tool–specific function 2 ON
Min. input limit: – 1
Protection level: 3/4
This MD is used to define an M command for tool–specific function 2.
The value –1 means that the M function is not output.
If both M commands of function 2 =–1, the corresponding field is not displayed on the inter-
face.
$MM_CMM__M_CODE_T OOL_FUNC_2_OFF
M code for tool–specific function 2 OFF
Min. input limit: – 1
Protection level: 3/4
This MD is used to define an M command for tool–specific function 2.
The value –1 means that the M function is not output.
If both M commands of function 2 =–1, the corresponding field is not displayed on the inter-
face.
$MM_CMM__M_CODE_T OOL_FUNC_3_ON
M code for tool–specific function 3 ON
Min. input limit: – 1
Protection level: 3/4
This MD is used to define an M command for tool–specific function 3.
The value –1 means that the M function is not output.
If both M commands of function 3 =–1, the corresponding field is not displayed on the inter-
face.
SINUMERIK 840D sl Commissioning Manual CNC: ShopMill – 11/2006 Edition
Max. input limit: 32767
Units: –
Valid as of software version
ShopMill 7.1
Max. input limit: 32767
Units: –
Valid as of software version
ShopMill 7.1
Max. input limit: 32767
Units: –
Valid as of software version
ShopMill 7.1
Max. input limit: 32767
Units: –
Valid as of software version
ShopMill 7.1
© Siemens AG 2006 All Rights Reserved
11/2006