Overview Of The Former Shopmill Interface; Signals To Shopmill (Input Signals) - Siemens SINUMERIK 840DE sl Commissioning Manual

11/2006
6.3

Overview of the former ShopMill interface

6.3.1

Signals to ShopMill (input signals)

Table 6-1 Signals to ShopMill (input signals)
Address
DB82
DBX
0.0 – 0.7 CMM_IN.transfer_base_sig
Transfer mode for MTTS signal
2.0 CMM_IN.base_sig.main_mode_mill.manual
ShopMill manual mode
2.1 CMM_IN.base_sig.main_mode_mill.automatic
ShopMill automatic mode
4.0 CMM_IN.base_sig.reset
RESET for ShopMill
4.1 CMM_IN.base_sig.nc_cycle_start
Cycle start
4.2 CMM_IN.base_sig.nc_cycle_stop
Cycle stop
6.0 CMM_IN.sub_mode_mill.tool
Operating area – tool
6.1 CMM_IN.sub_mode_mill.directory
Operating area – Directory
6.2 CMM_IN.sub_mode_mill.messages
Operating area – Alarms / messages
6.3 CMM_IN.sub_mode_mill.program
Operating area – program
6.4 CMM_IN.sub_mode_mill.oem1
Operating area – OEM1
6.5 CMM_IN.sub_mode_mill.oem2
Operating area – OEM2
6.6 CMM_IN.sub_mode_mill.customer
Operating area – Customer
6.7 CMM_IN.sub_mode_mill.mda
Operating area – MDA
8.0 CMM_IN.spndle_interface_number
Assignment of spindle/axis data
9.0 CMM_IN.user_defined_spindle_control
User–defined spindle control
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D sl Commissioning Manual CNC: ShopMill – 11/2006 Edition
The ShopMill PLC program and the corresponding ShopMill interface DB82 are
omitted in the new software release of ShopMill. The following tables show
where you can find the old interface signals of the DB82.
Name
Comments
6.3 Overview of the former ShopMill interface
Spares
Omitted since ShopMill PLC no longer exists
Transfer is via FC19/FC24 to the standard inter-
face DB11.DBX0.2 JOG.
Transfer is via FC19/FC24 to the standard inter-
face DB11.DBX0.0 AUTO.
Transfer is via FC19/FC24 to the standard inter-
face DB21.DBX7.7 Reset.
Transfer is via FC19/FC24 to the standard inter-
face DB21.DBX7.1 NC–Start.
Transfer is via FC19/FC24 to the standard inter-
face DB21.DBX7.3 NC–Stop.
Omitted. Use the appropriate key on the operator
panel; (see section 10.5 OP hotkeys, PLC keys).
Omitted. Use the appropriate key on the operator
panel; (see section 10.5 OP hotkeys, PLC keys).
Omitted. Use the appropriate key on the operator
panel; (see section 10.5 OP hotkeys, PLC keys).
Omitted. Use the appropriate key on the operator
panel; (see section 10.5 OP hotkeys, PLC keys).
n.a.
n.a.
n.a.
Transfer is via FC19/FC24 to the standard inter-
face DB11.DBX0.1 MDA.
Omitted since ShopMill PLC no longer exists
Omitted since ShopMill PLC no longer exists
6 Signal Description
6-33