Siemens SINUMERIK 840DE sl Commissioning Manual page 20

4 Commissioning
4.2 Initial start–up
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
General
machine data
Channel–specific
machine data
Axis
machine data
Fig. 4-1 General sequence of initial startup
General sequence
of initial startup
4-20
PCU 50.3:
HMI Advanced/
ShopMill
HMI sl
Configure the PLC
Load the basic program
Configure the drives
Configure the NCK
machine
Load the PLC
user project
NCK
functions
Cycles
(1) The first step in the startup sequence is to configure the control system, i.e.
to set up communication between all involved components. PLC, drive and
NCK are commissioned
References: /IDsl/, Commissioning Manual CNC: NCK, PLC,
drives, SINUMERIK 840D sl
(2) In a second step, the individual functions are started in several runs. The
startup sequence for these functions is described in the following sections.
SINUMERIK 840D sl Commissioning Manual CNC: ShopMill – 11/2006 Edition
NCU:
HMI Embedded/
ShopMill
Display
machine data
GUDs,
macros
© Siemens AG 2006 All Rights Reserved
11/2006
1
2