Drive-Cliq Topology At The Hf Line-Up - Siemens SINAMICS S120 System Manual

Configuring
10.2 Preconditions for commissioning
10.2.4

DRIVE-CLiQ topology at the HF line-up

To operate a High Frequency Drive with an NX module, the topology depends on the pulse
frequency. An overview is shown in the table.
Pulse frequency
16 kHz
32 kHz
①
Figure 10-3
158
Module
NX15
NX15
For operation with only one HF Drive 16 kHz, the DRIVE-CLiQ cable can be directly connected
from the Active Line Module to the HF Motor Module.
DRIVE-CLiQ topology for HF Drives 16 kHz (62.5 µs) with Active Line Module and NX
module
Possible number of HF Drives
2 and infeed (optional)
1 and infeed (optional)
System Manual, (SH2), 04/2015, 6SL3097-4AH10-0BP3
High Frequency Drive