Screen Display Buttons; Figure 4-4. Home Screen; Figure 4-5. Ap3600 Main Power Switch - Hitachi OPTIGEN AP3600 User Manual

FIGURE 4-4. Home Screen

6. Click the Set-Up & Run button to open the test run wizard. This wizard is discussed in Chapter 5, Set Up & Run Wizard.

Screen Display Buttons

All the DMS screens can be accessed by pressing one of the following screen display buttons in the Home screen.
For more information on each screen, refer to the following chapters:
•
Chapter 5, Set Up & Run Wizard
•
Chapter 6, Work List Screen
•
Chapter 7, Results Screen
•
Chapter 8, Utilities Screen
•
Chapter 9, System Settings Screen
The buttons on the right side of the Home screen allow the operator to perform either of the following tasks:
•
Log Off: Touch the Log Off button to log the operator out of the DMS software. The instrument will remain on.
• Shutdown: Touch the Shutdown button to exit the DMS software. To shutdown the instrument, first select "Shutdown" from
the main menu, wait until the screen turns dark and then turn the main power switch to the OFF position (0).

FIGURE 4-5. AP3600 Main Power Switch

OFF Position
Prepare the AP3600 System for the Assay
4-3