Silvercrest 284982 Operation And Safety Notes page 10

Failure to observe the follow-
ing warnings can result in in-
juries or property damage.
Do not change the accessories
while the product is switched on.
Do not use the product if you
detect any kind of visible, exter-
nal damage. Never use a dam-
aged product.
If liquid gets into the product,
check before using the product
again.
If you notice that the supply
cord, power adapter, housing or
another part has become dam-
aged, the product can no lon-
ger be used.
Repairs should only be carried
out by a specialist. Improper re-
pairs may result in considerable
danger to the user. This will also
make any warranty claims void.
Do not use defective attachments
with the product as these could
have sharp corners.
Defective components must al-
ways be replaced with original
spare parts. Only by using origi-
nal spare parts can you ensure
that safety requirements are met.
10 US-EN
Connect the power adapter to
an outlet which is well within
reach.
Never use the product unsuper-
vised and only use it in accor-
dance with the information
stated on the type plate.
Connect the supply cord to the
product before inserting the
power adapter into the outlet.
The tips of the attachments are
sharp.
Do not use the product if the at-
tachments appear to be dam-
aged.
Switch off the product before
attaching or switching the at-
tachments, as well as before
cleaning.
Lay the supply cord so nobody
will step on or trip over it.
Do not use the product if you
have an open wound, cut,
sunburn or blister.
Electrical products may pose a
hazard to animals. Animals can
also damage the product. Al-
ways keep animals away from
electrical products.
Protect the product from moisture,
drops of water and splashing
water.