Trimming Hair - Silvercrest 284982 Operation And Safety Notes

Trimming hair

Note: The hair being trimmed should be clean,
dry and untangled.
Carefully comb the hair using the supplied
styling comb to untangle any knots.
17
Place the cutting cape
and nape to prevent hair clippings from falling
into the collar.
Begin by using the longer comb attachment
and trim the hair gradually to the desired length.
Note that the desired trim length can only be
achieved if the product is held perpendicularly
to the skin.
Avoid any sudden movements while trimming.
Switch the product on by sliding the ON / OFF
switch to the "I" position. To maximize per-
3
formance, slide the ON / OFF switch
"Turbo" position. The Turbo display
then light up.
Always trim from the nape toward the top of
the head, or from the forehead and temples
toward the crown of the head.
Move the product slowly and steadily through
the hair. If possible, trim against hair growth.
Comb Trim
attachment length
(in / mm) (in / mm)
⅛
/ 3.0
1/4 / 6.0
3/8 / 9.0
1/2 / 12.0
3/4 / 20.0
1 ³⁄₁₆ / 30.0
Note: Be sure to move the product away from the
hairline and slowly move it downward.
Note: The scissors
18
additional styling.
14 US-EN
around the neck
15
to the
3
will
8
Trim length with accurate trim adjustment (in / mm)
1/3₂
/ 0.8
⁵⁄₃₂ / 3.8
¹⁷⁄₆₄ / 6.8
²⁵⁄₆₄ / 9.8
1/2 / 12.8
¹ ⁄₁₆ / 20.8
3
1 ⁄₃₂ / 30.8
7
supplied may be used for
Hold the product so the comb attachment
is as level as possible.
Move the product over the head several times
to cover all of the hair. For an even cut, move
the product through the hair several times from
different directions.
Comb the hair repeatedly.
You can adjust the desired trim length of the
comb attachment
ing the lower part of the product
to the length position indicator
11
justments vary by ⅛ in / 0.3 mm.
Example:
Comb attachment 1/8 in / 3.0 mm
(trim length ⁵/₃₂–¹³/₆₄ in / 3.8–5 mm):
Far left position
(1/3₂ in / 0.8 mm):
Middle position
(1/1₆ in / 1.4 mm):
Far right position
(5/6₄ in / 2.0 mm):
³⁄₆₄ / 1.1 1/1₆ / 1.4
⁵⁄₃₂ / 4.1 ¹¹⁄₆₄ / 4.4
⁹⁄₃₂ / 7.1 ¹⁹⁄₆₄ / 7.4
²⁵⁄₆₄ /10.1 ¹³ ₃₂ / 10.4
/
³³⁄₆₄ / 13.1 ¹⁷ ₃₂ / 13.4
/
⁵³⁄₆₄ / 21.1 ²⁷⁄₃₂ / 21.4
1 ⁷⁄₃₂ / 31.1 1 ⁄₆₄ / 31.4
15
more accurately by rotat-
11
according
5
. These ad-
4
short hair
(⁵⁄₃₂ in / 3.8 mm)
mid-length hair
(¹¹⁄₆₄ in / 4.4 mm)
long hair
(¹³⁄₆₄ in / 5.0 mm)
1/1₆ / 1.7 5/6₄ / 2.0
³⁄₁₆ / 4.7 ¹³⁄₆₄ / 5.0
¹⁹⁄₆₄ / 7.7 ⁵⁄₁₆ / 8.0
²⁷⁄₆₄ / 10.7 ⁷⁄₁₆ / 11.0
³⁵⁄₆₄ / 13.7 ³⁵⁄₆₄ / 14.0
⁵⁵⁄₆₄ / 21.7 ⁵⁵⁄₆₄ / 22.0
1 ¹⁄₄ / 31.7 1 ¹⁷⁄₆₄ / 32.0
11