Thinning Hair; Trimming Beards; Cleaning And Care - Silvercrest 284982 Operation And Safety Notes

Thinning hair

Note: Using this function you can reduce the hair
volume by only trimming some of it.
Attach the thinning attachment
product as described under "Changing
the attachments."
Note: The thinning attachment
trim some of the hair.

Trimming beards

Note that the desired trim length can only be
achieved if the product is held perpendicularly
to the skin.
Comb the beard using the supplied styling
comb in its direction of growth.
17
Trim the beard moving down from the ear to-
ward the chin, first one side, then the other.
Use the cutting unit
tachment to trim the beard very short or to
11
trim a mustache or hairline.
Adjust the desired trim length by rotating the
lower part of the product
length position indicator
trim length settings (¹⁄₃₂ in / 0.8 mm ;
³⁄₆₄ in / 1.1 mm ; 1/1₆ in / 1.4 mm ; 1/1₆ in / 1.7 mm ;
5/6₄ in / 2.0 mm).
To trim a mustache, firstly comb it straight
down. Start at the center above the mouth,
then one side and then the other.

Cleaning and care

DANGER TO LIFE BY ELEC-
TRIC SHOCK!
adapter from the power outlet before
7
cleaning the product.
Never touch the power adapter
or wet hands, especially when you plug it into
or unplug it from the outlet.
to the
12
will only
12
without the comb at-
1
according to
5
. Choose from 5
4
Unplug the power
with moist
7
Always keep the power adapter
ply cord dry.
CAUTION! RISK OF PROP-
ERTY DAMAGE!
the product in water or any other liquid to
clean it as the product is not waterproof. This
could damage the live parts (rechargeable
batteries).
Do not use any corrosive or abrasive cleaning
agents.
Clean the housing and the charger
damp cloth and a mild detergent.
Switch the product off by sliding the ON / OFF
switch to the "0" position.
3
Disconnect the supply cord from the product
and unplug the power adapter
power outlet.
Remove the comb attachment
attachment or the cutting unit
12
product.
If necessary, rinse the comb attachment
thinning attachment
12
der running water.
Dry the comb attachment
attachment .
12
and sup-
7
Do not submerge
using a
6
from the
7
, the thinning
11
from the
1
,
11
or cutting unit un-
1
or the thinning
11
US-EN 15