Operation; Synchronising Transmitter / Receiver; Setting The Signal Type - Silvercrest 60113 Operation And Safety Notes

Operation

Synchronising transmitter / receiver

Synchronise the transmitter and receiver as follows:
Press the synchronisation button
Press the chime button
programmed audible signal sounds and the signal indicator
ceases to illuminate.
If the receiver does not react as described, press the synchronisation
button
the synchronisation process.
The transmitter indicates the transmission of the signal to the receiver by
the signal indicator

Setting the signal type

The receiver can indicate the reception of a door signal either optically
or acoustically or both optically and acoustically.
Using the signal type selector button
is to be indicated optically or acoustically or both optically and
acoustically.
60113_silv_Tuerklingel_content_PL_HU_SI_CZ_SK.indd 15
; the signal indicator
13
again to switch off the synchronisation function and repeat
2
flashing briefly.
11
.
2
flashes red. The
1
, select whether the signal
5
1
GB 15
16.05.14 13:21