DAB+ radio operation (DAB)
Automatic station scan (AMS)
The automatic station scan with station saving scans the entire frequency band
once and automatically saves the DAB+ radio stations found as a station list.
♦
This device must be switched on. If necessary, briefly press the
to switch on the device.
If necessary, briefly press the SOURCE /
♦
DAB+ radio mode is shown on the display
♦
Briefly press the
station scan with station saving. The display
Scanning... DAB and the number of found stations. The scan progress is dis-
played as a progress bar. The DAB+ radio stations found are automatically
stored in the station list on order of increasing frequency. When the scan is
finished, the first station in the station list is automatically played back.
NOTE
►
An automatic station scan with station saving may overwrite an existing
station list.
Selecting stations
Press the TUNE+
♦
from the station list. After approx. 2 seconds, the displayed station is auto-
matically played back.
Saving stations manually
Press the TUNE+
♦
from the station list.
Press the PRESET
♦
the last selected radio station (if radio stations have already been stored).
If no radio stations have yet been stored, the display
empty.
Press the TUNE+
♦
♦
Press the
preset space. The preset space of the stored station is shown in the upper
right corner of the display
NOTE
►
Any previously stored stations will be overwritten.
SBDB 5 A1
ENTER / SCAN button
9
or TUNE− button
9
or TUNE− button
button 7
. The display
9
or TUNE− button
ENTER / SCAN button
1
(e.g. P1 for preset 1).
4
several times until the
button
1.
3
to start the automatic
1
now shows the message
8
to select a DAB+ radio station
8
to select a DAB+ radio station
1
shows the preset position with
1
shows Preset 1
8
to select the desired preset.
3
to store the station in the selected
GB │ IE │ NI
2
button
│
13
■