Fault
Interference with the
radio reception.
No automatic
setting of time and
date.
NOTE
►
If you cannot solve the problem with the solutions given above, please
contact the Service Hotline (see section Service).
Cleaning
DANGER
Risk of fatal injury from electrocution!
►
Pull out the plug of the mains adapter from the power socket before starting
to clean the device.
CAUTION
Damage to the device!
►
To avoid irreparable damage to the device, ensure that no moisture can
penetrate the device during cleaning.
►
Do not use caustic, abrasive or solvent-based cleaning materials.
These can damage the surfaces of the device.
Cleaning the housing
♦
Clean the surfaces of the device with a soft, dry cloth.
♦
Use a lightly moistened cloth and a mild detergent to remove stubborn dirt
residues.
Storage when not in use
♦
If you do not intend to use the device for an extended period of time,
disconnect it from the power supply, remove the batteries and store
it in a clean, dry place without exposure to direct sunlight.
SBDB 5 A1
Possible cause
Radio reception is too weak.
The RDS signal is not
available.
Remedy
Try to improve reception by moving
i
the screw aerial
or by setting up
the radio in a different location.
Try to improve reception by moving
i
the screw aerial
or by setting up
the radio in a different location.
GB │ IE │ NI
│
25
■