Settings Menu; Alarm Times - Silvercrest SBDB 5 A1 Operating Instructions And Safety Instructions

♦ Connect the external playback device to the 3.5 mm jack cable
AUX IN compartment
♦ Briefly press the
If necessary, briefly press the SOURCE /
♦
Auxiliary Input appears on the display
♦ Turn on the external playback device and start playback.
Afterwards, set the desired volume using the VOLUME dial
♦
Alternatively, you can increase the volume on the external playback device.
You can now stow the external playback device in the AUX IN compart-
♦
ment
by turning the three catches
to the locking position. Note also the labels OPEN and CLOSE with the
corresponding arrows on the catches
♦ To stop AUX operation, turn off the radio and the external playback device.
Disconnect the external playback device from the 3.5 mm jack cable
the radio. Alternatively, you can press the SOURCE /
directly from AUX IN mode to radio mode or Bluetooth

Settings menu

NOTE
► The settings menu can be called up during operation as well as in standby
mode.
► If no setting is made in the setup menu for more than 7 seconds, the setup
menu is exited.
During normal operation or standby, press the INFO / MENU button
♦
for about 2 seconds until System appears on the display

Alarm times

The device has two alarm functions, Alarm1 and Alarm2, both of which can be
programmed to play the last radio station you listened to or to sound an alarm at
a specific time.
Setting the alarm
Press the INFO / MENU button
♦
settings menu. Alarms is shown as the first menu option on the display
Press the
♦
Press the TUNE+
♦
♦ Press the
Alarm Detail
♦ Press the
Press the TUNE+ button
♦
SBDB 5 A1
z
of the radio.
2
button
z
(if it fits). If necessary, close the AUX IN compartment
ENTER / SCAN button
9
or TUNE− button
ENTER / SCAN button
appears on the display
ENTER / SCAN button
9
to switch on the radio.
button
1
.
u
of the AUX IN compartment
u
of the AUX IN compartment
0
for about 2 seconds to call up the
3
to confirm the selection.
8
select either Alarm1 or Alarm2.
3
to confirm the selection.
1
.
3
to set the alarm to On.
to go next to the setting of the alarm time.
t
in the
4
several times until
5
on the radio.
z
again
z
clockwise
z
t
4
button to switch
®
mode.
0
1
.
1.
GB │ IE │ NI │ 19
.
of
■