Cleaning And Care; Storage During Non-Use; Troubleshooting - Silvercrest SDRF 10 A1 Operation And Safety Notes

Press the Select button
Under System Settings, select "Factory Reset" and press the Select
button to confirm. The colour LCD
16
Yes / No".
Press the Prev button
button again to confirm your selection.
16

Cleaning and care

Unplug the power supply
the product.
Do not use solvents or other aggressive or abrasive cleaning
agents, as these may damage the surfaces and the markings.
Only clean the outside of the product, using a soft, dry cloth.

Storage during non-use

If the product will not be used for a longer period of time, unplug
the power supply
and store the product in a dark, cool location.

Troubleshooting

= Problem
= Possible cause
= Solution
= The product does not switch on.
= The power supply
= Plug the power supply
batteries.
to confirm.
16
to select "Yes" and press the Select
11
from the mains socket before cleaning
19
from the mains socket, remove the batteries
19
is not connected. / The batteries are drained.
19
into the mains socket. / Insert new
19
will read "Factory Reset
1
GB/IE/NI 35