Table of Contents
Advertisement
Product Overview
1. Handle-adjustment knob
2. Throttle handle
3. ProPitch handle (Models
68049 and 68051 only)
Figure 3
4. Dyna-Clutch lever
5. Tilt-adjustment knob
(Models 68048 and 68050
only)
g019519
1. Lifting point
2. Fuel-tank cap
3. Choke lever
4. Fuel valve
Controls
Recoil-Starter Handle
Pull the recoil-starter handle to start the engine
(Figure
4).
Fuel Valve
Close the fuel valve when transporting or storing the
machine
(Figure
g020316
Choke Lever
Use the choke lever
Before pulling the recoil-starter handle, move the
choke lever to the closed position. Once the engine is
running, move the choke lever to the open position.
Note:
A warm engine requires little or no choking.
Engine On/Off Switch
The On/Off switch
the machine to start and shut off the engine. This
switch is located on the front of the engine. Rotate the
On/Off switch to the On position to start and run the
7
Figure 4
5. Sediment cup
6. Recoil-starter handle
7. Engine On/Off switch
4).
(Figure
4) to start a cold engine.
(Figure
4) allows the operator of
g021560
Advertisement
Table of Contents
