Stretch-Stitch; Patch Work - Silvercrest SNM 33 C1 Operation And Safety Notes

Sewing basics

Stretch-stitch

A

Patch work

24 US-EN
Stitch
Triple straight stitch (A)
For hardwearing seams.
The machine sews two stitches forwards
and one stitch backwards. This gives triple
reinforcement.
Stitch
Triple zigzag (B)
For hardwearing seams, hems and
decorative seams.
B
denim, corduroy, etc.
Stitch
To join two pieces of fabric while leaving a
space between their edges.
1. Fold over the edges of the two pieces
of fabric for the hem and tack the edges
to a thin piece of paper leaving a small
space between them.
Triple zigzag is suitable for firm fabrics like
2. Stitch along the edge, pulling both
threads slightly when beginning to sew.
3. Use thicker than normal threads for
sewing.
4. After sewing, remove the tacking and
the paper. Finish by tying knots on the
reverse side at the beginning and the
end of the seams.
Stitch width stitch length
2.5 S1, S2
Stitch width stitch length
3~5 S1, S2
Stitch width stitch length
3~5 S1