Connecting Machine To Power Source - Silvercrest SNM 33 C1 Operation And Safety Notes

Connecting machine to power source

Important:
Unplug power cable when machine is not
in use.
Important:
about connecting the machine to the
power source. Unplug power cable if you
are not using the power supply.
20
Connect the machine to a power source
as illustrated in the adjacent drawing.
Illumination
The machine is started and the light
switched on by pressing the main switch
(20) in position " l ".
Foot pedal
The operating speed of the machine is
regulated with the pedal (t).
Consult a qualified electrician if in doubt
Getting ready Getting ready
US-EN 9