Mitsubishi Electric Melsec Q Series User Manual page 156

5 WHEN USING FILE TRANSFER FUNCTIONS (FTP SERVER)
5 - 23
mdir
[Function]
[Designation format]
[Designation example]
[Caution]
[Similar function]
mget
[Function]
[Designation format]
[Designation example]
[Caution]
Stores the detailed information (file name, creation date, and
size) of the files stored in a CPU module to the FTP client-side
file as log data.
mdir transfer source drive:\ transfer destination file path
To store the detailed information of the files stored in the RAM
area of memory card to S990901.LOG file:
mdir 1:\ S990901.LOG
• Always designate "\" directly after the drive name of the
transfer source.
• When designating the transfer destination file path (FTP client
side), always designate the transfer source drive name.
• When the transfer destination file path is not designated, the
file name set by the FTP application on the FTP client side is
used to save the file.
• The transfer destination is the connected current directory of
the FTP startup connection.
mls
Reads a file from a CPU module.
When reading multiple files, the file name and extension for the
file path is designated using wild cards ( or ?).
Receive confirmation is performed for each file transfer.
mget FILE PATH
To read all files with extension "QPG" from the files stored in the
RAM area of memory card :
mget 1:\ .QPG
• The files read are stored on the FTP client side with the same
file name.
The destination is the connected current directory of the FTP
startup connection.
• See sections 5.5 and 5.6.1.
MELSEC-Q/L
5 - 23