Receiving A News E-Mail - Mitsubishi Electric Melsec Q Series User Manual

2 USING THE E-MAIL FUNCTION

2.9.2 Receiving a news e-mail

No. " ··· "
No. of transmissions( 1)
CPU module status
At normal
During RUN
At module warning occurrence "Status : RUN (Warning)" or "Status : RUN (Slight Abnormal)"
At normal
At module warning occurrence "Status : STOP (Warning)" or "Status : STOP (Slight Abnormal)"
During STOP
During the module error or
module system error
During PAUSE
2 - 37
The designated external device side can open the news e-mail from the Ethernet
module in the same way as opening a mail received from the programmable controller
CPU.
(1) When monitoring the CPU status
(a) When the result of the CPU status monitoring matches the monitoring
condition, the Subject will be sent. The attached file or main text will not be
sent.
(b) The following shows the contents for the Subject sent.
" ··· " Status
1 This is the number automatically added each time an Ethernet module sends an
e-mail. The numbers are counted up from 1. When the number reaches
4294967296, the number is cleared to 0. Then the numbers are counted up from
0 again to 4294967296.
(Send contents of the parts for the status)
—
" ··· " Time "yyyy/mm/dd hh:mm:ss"
CPU model name
"Status : RUN"
"Status : STOP"
"Status : STOP (Serious/Fatal Error)" or "Status : STOP (Abnormal)"
"Status : PAUSE"
MELSEC-Q/L
Status
Send contents
Detection time
2 - 37