Mitsubishi Electric Melsec Q Series User Manual page 59

2 USING THE E-MAIL FUNCTION
2 - 31
(4) Receiving by a personal computer
The following explains how a PC/UNIX/portable terminal receives e-mail sent
from the Ethernet module.
After setting the environment where the Internet is accessible with a mail user
agent, receive an e-mail on the receiving message screen as follows.
(Example) The following shows an example of the reception of e-mail sent using
the MSEND instruction (see (3)).
(The following is a screen of Microsoft
Office Outlook 2003.)
(a) From
Displays the e-mail address of the Ethernet module.
REMARKS
By entering the mail addresses of the send destination devices in the address book,
the registered names (display names) can be displayed and it makes the
management easier.
(b) Subject
This indicates the No. of transmissions ( 1) and the Subject written by a
sequence program.
1 This is the number automatically added each time an Ethernet module
sends an e-mail. The numbers are counted up from 1. When the
number reaches 4294967296, the number is cleared to 0. Then the
numbers are counted up from 0 again to 4294967296.
(c) Main text of e-mail
This indicates the main text of e-mail sent by the Ethernet module.
MELSEC-Q/L
®
Corporation's Microsoft
2 - 31