Mitsubishi Electric MELSEC iQ-R Series User Manual page 115

Section 6 SETTING AND PROCEDURE FOR OPERATION
6.4.2 Parameter setting
Set the parameters.
Setting parameters on the screen omits the parameter setting in a program.
(1) Setting procedure
Below diagrams are examples of setting the RE81WH as "Mounting slot No.: 0", "Start I/O No.: 0000".
The start I/O No. varies depending on the mounting slot No.
(a) Open the "Parameter editor".
Double-click "Parameter" → "Module Information" → "n:RE81WH" in "Navigation" window and
"Module Parameter" is opened.
(The "n" is start I/O No. of target module.)
(b) Select the items from [Setting Item List] and [Setting Item], and select from pull-down list or input from
text box the setting value.
(i) Items to select from the pull-down list
When select the item to set, displayed the triangle (▼) at the right in cell.
Click the triangle (▼), and select a setting value from pull-down list.
(ii) Items to input from the text box
Double-click the item to set, and input the setting value.
Items to select
from the pull-down list
Items to input
from the text box
114
RE81WH