Mitsubishi Electric MELSEC iQ-R Series User Manual page 117

Section 6 SETTING AND PROCEDURE FOR OPERATION
(d) Reset the CPU module (OFF → ON) or power on the programmable controller again.
(e) Operate the CPU module "STOP → RUN".
(f) Open the "Device/Buffer Memory Batch Monitor".
Select [Online] → [Monitor] → [Device/Buffer Memory Batch Monitor].
(g) Input "Yn9" in device name, and press [Enter] key.
Right-click on "0" column of "Yn9" row, and click [Modify Value].
The value changes from "0" to "1".
(The "n" is the Start I/O No. of the unit)
Example: When start I/O No. is 0040,
Input the "Y49" in device name.
(h) Input "Xn9" as device name, then press [Enter] key.
Where setting contents set in the parameter are applied, [0] column of [Xn9] row is changed to "1".
After confirming the value is "1", then change [0] column of [Xn9] row from "1" to "0" according to
procedure (g).
116
RE81WH