Mitsubishi Electric MELSEC iQ-R Series User Manual page 146

Section 10 SPECIFICATION
*2: 5 A primary current can be set when using the current sensor is as follows.
5A, 6A, 7.5A, 8A, 10A, 12A, 15A, 20A, 25A, 30A, 40A, 50A, 60A, 75A, 80A, 100A, 120A, 150A, 200A,
250A, 300A, 400A, 500A, 600A, 750A , 800A, 1000A, 1200A, 1500A, 1600A, 2000A, 2500A, 3000A,
4000A, 5000A, 6000A (Primary current of CT can be set up to 6000A in any . However, secondary current
of CT can not be set to other than 5A).
*3: Please refer to "10.4.1" as for the ratio error of the current sensor.
*4: Demand shows the moving average of a set period.
*5: As to measuring cycle, refer to "4.2.1(8)".
145
RE81WH