Mitsubishi Electric MELSEC iQ-R Series User Manual page 150

Section 10 SPECIFICATION
■ 5A current sensor
Item
Model
Rated primary current
Rated secondary current
Rated burden
Maximum voltage
(voltage to ground / line voltage)
Ratio error
Phase displacement
Measurement (installation) category
Pollution degree
Working temperature range
Working humidity range
CE marking conformity standard
CE marking conformity standard
Maximum voltage
Weight (per one)
* Use an electric wire of the size of penetrating this current sensor for a primary side cable, do not use a non-
insulation electric wire or a metal for a primary cable.
* Use insulation wire rather than basic insulation for the primary side cable of current sensor.
* Do not ground the secondary side of the current sensor.
EMU2-CT5
260V AC
±1% (5% to 100% of rating,
R ≤ 10Ω )
L
±0.9 c rad (5% to 100% of rating,
R ≤ 10Ω )
L
III
2
-5 to +55°C (daily mean
temperature: 35°C or less)
5% to 95%RH (no condensation)
EN61010-2-32
260V AC
0.1kg
149
Specifications
EMU-CT5-A
5A AC
1.66mA
0.1VA
460V AC
±1% (5% to 100% of rating,
R ≤ 10Ω )
L
±1.3 c rad (10% to 100% of rating,
R ≤ 10Ω )
L
±1.8 c rad (5% of rating, R
-5 to +55°C (daily mean
temperature: 35°C or less)
30% to 85%RH (co condensation)
0.05kg
RE81WH
= 10Ω )
L
-
-
-
-