Replacing The Solid-State Drive/Intel Optane; Procedure; Post-Requisites - Dell Inspiron 15 5000 Service Manual

Replacing the solid-state drive/Intel Optane

Enable the Intel Optane after you replace it. For more information about enabling the Intel Optane, see
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive.
Topics:
•

Procedure

•

Post-requisites

Procedure
1. Align the notch on the solid-state drive/Intel Optane with the tab on the solid-state drive/Intel Optane slot.
2. Slide the solid-state drive/Intel Optane into the solid-state drive/Intel Optane slot.
3. Align the screw holes on the solid-state drive shield/Intel Optane shield with the screw holes on the palm rest and keyboard assembly.
4. Tighten the two captive screws that secure the solid-state drive shield/Intel Optane shield and solid-state drive/Intel Optane to the
palm rest and keyboard assembly.
Post-requisites
1. Replace the base cover.
2. Replace the optical drive (optional).
computer. After working inside your computer, follow the instructions in
Enabling Intel
Replacing the solid-state drive/Intel Optane
20
Optane.
After
37