Replacing the power button with fingerprint
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
NOTE:
Applicable only for computers that are shipped with fingerprint reader.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Using the alignment posts, align and place the power button with fingerprint reader on the palm rest and keyboard assembly.
2. Replace the screw (M2x2) that secures the power button with fingerprint reader to the palm rest and keyboard assembly.
3. Adhere the fingerprint reader cable on the palm rest and keyboard assembly.
Post-requisites
1. Replace the
system
board.
2. Replace the
power-button
3. Replace the
wireless
card.
4. Replace the
heat
sink.
5. Replace the fan.
6. Replace the
solid-state drive/Intel
computer. After working inside your computer, follow the instructions in
board.
Optane.
Replacing the power button with fingerprint reader
40
reader
After
67