Removing The Power Button With Fingerprint Reader; Prerequisites; Procedure - Dell Inspiron 15 5000 Service Manual

Removing the power button with fingerprint
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
NOTE: Applicable only for computers that are shipped with fingerprint reader.
Topics:
•

Prerequisites

•

Procedure

Prerequisites
1. Remove the optical drive (optional).
2. Remove the base cover.
3. Remove the battery.
4. Remove the solid-state drive/Intel
5. Remove the fan.
6. Remove the heat sink.
7. Remove the wireless card.
8. Remove the power-button
9. Remove the system board.
Procedure
1. Peel the fingerprint reader cable off the palm rest and keyboard assembly.
2. Remove the screw (M2x2) that secures the power button with fingerprint reader to the palm rest and keyboard assembly.
3. Using a plastic scribe, release the fingerprint-reader board from the palm rest and keyboard assembly.
4. Lift the power button with fingerprint reader, along with its cable, off the palm rest and keyboard assembly.
computer. After working inside your computer, follow the instructions in
Optane.
board.

Removing the power button with fingerprint reader

39
reader
After
65