NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Align the screw holes on the hinges and brackets with the screw holes on the display back-cover and antenna assembly.
2. Replace the two screws (M2x2) that secure the hinges to the display back-cover and antenna assembly.
3. Replace the eight screws (M2.5x2.5) that secure the hinges to the display back-cover and antenna assembly .
Post-requisites
1. Replace the
display
panel.
2. Replace the
display
bezel.
3. Replace the
display
assembly.
4. Replace the
wireless
card.
5. Replace the
base
cover.
6. Replace the
optical drive
(optional).
80
Replacing the display hinges
Replacing the display hinges
computer. After working inside your computer, follow the instructions in
50
After