NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Align the screw hole on the power-adapter port with the screw hole on the palm rest and keyboard assembly.
2. Replace the screw (M2x2) that secures the power-adapter port to the palm rest and keyboard assembly.
3. Route the power-adapter port cable through the routing guides on the palm rest and keyboard assembly.
4. Connect the power-adapter port cable to the system board.
5. Close the right hinge and replace the three screws (M2.5x5) that secure the right hinge to the system board and palm rest assembly.
Post-requisites
1. Replace the
wireless
card.
2. Replace the
base
cover.
3. Replace the
optical drive
(optional).
Replacing the power-adapter port
computer. After working inside your computer, follow the instructions in
Replacing the power-adapter port
30
After
49