NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
NOTE:
Ensure that the touchpad is aligned with the guides available on the palm-rest and keyboard assembly, and the
gap on either sides of the touchpad is equal.
1. Slide and place the touchpad into the slot on the palm rest and keyboard assembly.
2. Replace the four screws (M2x2) that secure the touchpad to the palm rest and keyboard assembly.
3. Adhere the tape that secures the touchpad to the palm rest and keyboard assembly.
4. Slide the touchpad cable, keyboard back-light cable and hard-drive cable into their respective connectors on the system board and
close the latch to secure the cables.
Post-requisites
1. Replace the battery.
2. Replace the
base
cover.
3. Replace the
optical drive
(optional).
Replacing the touchpad
computer. After working inside your computer, follow the instructions in
24
After
Replacing the touchpad
43