Controls - Toro LT-F3000 Operator's Manual

Controls

Control Panel Components
1. Ignition switch
2. Lighting switch (supplied
with lighting kit)
3. Limited-lift-in-reverse
switch
4. Throttle-control lever
5. Horn button
6. Engine-oil-warning light
7. Battery-charge-warning
light
8. Hydraulic-fluid-warning
light
9. Engine-coolant-warning
light
10. Cutting-unit-drive switch
Figure 4
11. Transmission-neutral
indicator
12. Parking-brake switch
13. Engine-preheat-indicator
light
14. Direction-indicator switch
(supplied with lighting kit)
15. Differential-lock switch
16. Lift-control switches
17. Hazard-warning switch
(supplied with lighting kit)
18. Warning-beacon switch
(supplied with beacon kit)
19. Hour meter
20. Auxiliary 12 V socket
1. Weight transfer control
g034879
1. Reverse travel pedal
Braking System
Parking Brake
Move the parking-brake switch to the forward position
by pressing the smaller locking button and moving the
switch forward to engage the parking brake
Note:
Do not operate the mower with the parking
brake engaged and do not engage the parking brake
while the mower is moving.
This light illuminates when the parking brake is
engaged and the ignition key is turned to position I.
11
Figure 5
Figure 6
2. Forward travel pedal
(Figure
g014419
g014420
7).