Table of Contents
Advertisement
®
ABB i-bus
EIB / KNX
4.3.9
Communication objects
4.3.9.1
Overview of the
objects
© 2004 ABB STOTZ-KONTAKT GmbH
Project design and programming
General objects
No
Function
0/15
Switch
Switches the output on and off.
1/16
Status switch
This object reports the current state of the output.
29
Telegr. status byte
This object provides further information about the operating state of the device (only
Electronic Switch Actuator Modules ES/M 2.230.1 and ES/M 2.24.1).
Additional function "Time, staircase lighting, flashing"
No
Function
2/17
Permanent ON
For continuous activation of the output in the staircase lighting function.
3/18
Warning stairc. lighting
Used to issue a warning before the staircase lighting time elapses.
4/19
Duration of staircase
lighting
Changes the duration of the staircase lighting (in seconds).
Additional function "Preset"
No
Function
5/20
Call preset 1/2 and
7/22
Call preset 3/4
Retrieves a parameterised output state.
"0" retrieves preset1 or preset3
"1" retrieves preset2 or preset4
6/21
Set preset 1/2 and
8/23
Set preset 3/4
Stores the current switching state of the output as a new preset value.
"0" stores preset1 or preset3
"1" stores preset2 or preset4
Additional function "Scene (8-bit)"
No
Function
9/24
8-bit scene
Integrates the actuator in a scene. The object value contains a scene number as well as the
instruction as to whether a scene should be retrieved or the current output state should be
stored as a new scene value.
Object name
Data type
Output A
1 bit (EIS 1)
Output A
1 bit (EIS 1)
1 byte (non EIS)
Output A...B
Object name
Data type
Output A
1 bit (EIS1)
Output A
1 bit (EIS1)
2 byte
Output A
(DPT7.005)
Object name
Data type
Output A
1 Bit (EIS1)
Output A
1 bit (EIS1)
Object name
Data type
1 byte
Output A
(DPT18.001)
Flags
CW
CRT
CRT
Flags
CW
CT
CRW
Flags
CW
CW
Flags
CW
38
Advertisement
Table of Contents
