Parameter Window: "Scene - ABB i-bus EIB Product Manual

®
ABB i-bus EIB / KNX
4.3.5 Parameter window:
"Scene"
© 2004 ABB STOTZ-KONTAKT GmbH
Project design and programming
In the 8-bit scene, a push button sends a scene number which causes the
actuator to trigger a defined output state. The parameter window is enabled
under "A: Function".
Please note the function diagram in section 3.2.6.
Parameter: "Output is assigned to"
Max. 64 different scenes (1...64) can be addressed via a group address.
The output can be assigned to a maximum of 5 of them.
Parameter: "Standard value"
This parameter sets which state the output adopts when the scene is
retrieved.
By storing a scene, the user has the possibility of modifying the value that is
parameterised here. After programming or after a supply voltage failure, the
value that is parameterised here is restored.
Note: When a scene is retrieved
- the time functions are restarted
- the logic operations are re-evaluated
...
32