®
ABB i-bus
EIB / KNX
2.2.2
Circuit diagram
2.2.3
Description of the outputs
2.2.4
Assembly and installation
© 2004 ABB STOTZ-KONTAKT GmbH
Device technology
ABB
ES/M 2.230.1
U
= 115/230 V~
n
I
= 700 mA
n
®
ABB i-bus
N
L
N
L
1
2
3
4
5
6
A B
N
L'
N
L'
PE
PE
The device has two semiconductor outputs A and B. The switched incoming
supply is applied at output L'. The PE conductor is brought out from the
device to connect the protective conductor.
The device is solely intended for operation in the Room Controller Basis
Device. It can be snapped into any module slot. The mounting position can
be selected as required.
8