Function "Lightscene (8-Bit); Parameter Window: "Scene (1)" And "Scene (2); Function: "Characteristic Adjustment - ABB i-bus EIB Product Manual

®
ABB i-bus EIB / KNX
4.9 Function
"Lightscene (8-bit)"
4.9.1 Parameter window:
"Scene (1)" and "Scene (2)"
4.10 Function:
"Characteristic
adjustment"
© 2004 ABB STOTZ-KONTAKT GmbH
Project design and programming
This function enables the assignment of the output to up to 6 scene
numbers. If the object "8-bit scene" is received with one of the assigned
scene numbers, the stored scene value (brightness value) is retrieved or the
current brightness value is stored.
Parameter: "Output is assigned to"
A maximum of 64 different lightscenes (1...64) can be addressed via a group
address. The output can be assigned to a maximum of 6 scenes.
Parameter: "Standard brightness value"
The brightness value which is assigned to the lightscene after programming
is set here.
Parameter: "Time to set new brightness value ("Transition time")"
The transition time which is used to set the new lightscene is defined here.
The characteristic adjustment enables e.g. the adaptation of the dimming
characteristic curve of the lamp to the sensitivity of the human eye. Further
information about the function can be found under section 3.5.
...
...
36