®
ABB i-bus
EIB / KNX
2.3.2
Circuit diagram
2.3.3
Description of the outputs
2.3.4
Assembly and installation
© 2004 ABB STOTZ-KONTAKT GmbH
Device technology
ABB
UD/M 1.300.1
U
= 115/230 V~
n
P
= 150/300 VA
n
f
= 50/60 Hz
®
ABB i-bus
N
L
1
2
3
N
PE
The device has a dimmed output for the connection of a dimmable load. The
PE conductor is brought out from the device to connect the protective
conductor.
The device is solely intended for operation in the Room Controller Basis
Device. It can be snapped into any module slot. The mounting position can
be selected as required.
R,L,C
10