Parameter Window: "Staircase Lighting - ABB i-bus EIB Product Manual

®
ABB i-bus EIB / KNX
4.8.2 Parameter window:
"Staircase lighting"
© 2004 ABB STOTZ-KONTAKT GmbH
Project design and programming
Parameter: "Duration of staircase lighting"
The period during which the staircase lighting is switched on is set here
("Staircase lighting time t
Parameter: "Time for dimming down after enlightmt."
The speed for dimming down once the staircase lighting time has elapsed is
set here ("Dimming down time t
Parameter: "Brightness value for staircase lighting"
The brightness of the lighting during the staircase lighting time can be set
here (0..100%). If the brightness value is less than the lower dimming limit,
the lower dimming limit is set.
Parameter: "Extending staircase lighting by multiple operation
('pumping up')"
If a further ON telegram is received during the staircase lighting time, the
remaining staircase lighting time can be extended by a further staircase
lighting period. The maximum time can be set in this parameter.
In the setting "no", the staircase lighting time restarts on receipt of an ON
telegram ("retrigger function").
Parameter: "Reaction on switching off via object 'Switch'"
In the setting "no reaction", ON telegrams are ignored.
In the setting "switch off", the lighting is switched off (not for permanent ON).
In the setting "dimming down", the dimming down time is started when the
lighting is switched on (not for permanent ON).
Parameter: "Brightness value during permanent ON"
The brightness of the lighting can be set here (0...100%), while the object
"Permanent ON" has the value "1".
...
...
").
ON
").
D
34