®
ABB i-bus
EIB / KNX
© 2004 ABB STOTZ-KONTAKT GmbH
Project design and programming
Parameter:
"Time to set new brightness value ("Transition time")"
The speed with which a new preset value is set can be defined here.
This parameter is visible if the value "dimming on" has been set in the
parameter "Preset values 1/2". The period until the new brightness value is
reached can be set.
Parameter: "Preset 1/2 can be set via the bus"
The object "Set preset 1/2" is enabled via this parameter. It is used to store
the brightness value that is currently selected as the new preset value.
Telegram value "0" stores preset1 while telegram value "1" stores preset2.
The function of preset 3/4 is identical to preset 1/2.
27