Lr/M 1.6.1 Light Controller Module, 2-Fold, 6 A; Technical Data - ABB i-bus EIB Product Manual

®
ABB i-bus EIB / KNX
2.2 LR/M 1.6.1
Light Controller Module,
2-fold, 6 A
2.2.1

Technical data

Power supply / incoming supply
Outputs
Inputs
Connections
Ambient temperature range
Design
CE norm
© 2004 ABB STOTZ-KONTAKT GmbH
Device technology
The Light Controller Module is operated in a module slot of the Room
Controller Basis Device. It dims electronic ballasts with a 1...10 V interface
and enables constant lighting control e.g. in offices.
The device has an output for dimming a group of luminaires. A relay contact
is used for switching the lighting circuit on/off. For constant lighting control,
the device measures the current brightness (luminance) via a light sensor
input.
The device operates passively i.e. its 1...10 V output behaves like a
controlled resistor. The connected electronic ballast supplies the control
voltage.
Both the incoming supply and the internal voltage are supplied via the Room
Controller Basis Device. Contact is automatically established when the
modules are snapped in place.
– Operating voltage
– Incoming supply
– 1 load circuit
– 1 control output
– 1 light sensor input
– Load circuits
– Control outputs
– Light sensor input
– Wire ranges
– Operation
– Storage
– Transport
– Type of installation
– Housing, colour
– Housing dimensions (WxHxD)
– Weight
– in accordance with the EMC guideline and
the low voltage guideline
made available via the Room Controller Basis
Device, contact made via contact system on
base of module
0 ... 264 V AC, contact established via contact
surfaces at the front
Relay outputs
Switching current: 10 A/AC1
Continuous current: 6 A
Max. capacity: 35 µF
1...10 V DC (passive)
Control current: < 30 mA
For light sensor LF/U 1.1
Lighting control in range 200...1200 lx (typ.)
3-pole, plug-in screw terminal
2-pole, plug-in screw terminal
Max. cable length: 100 m
2-pole, plug-in screw terminal
Max. cable length: 100 m
2
0.2...2.5 mm finely stranded
2
0.2...4.0 mm single-core
- 5 °C ... 45 °C
-25 °C ... 55 °C
-25 °C ... 70 °C
For snapping into the
Room Controller Basis Device
Plastic housing, anthracite, halogen-free
49 x 42 x 93 mm
0.08 kg
7